khair khan - Quality Assurance Aerospace Engineer (ISO) - Shaheen Engineering And Aircraft Maintenance Services (Shaheen Air International airline )

Summary

Dear sir ,
As a highly skilled ISO Certified Quality Assurance Aerospace professional Engineer, Applying for an open position at Alsalam Aircraft Company . My experience with the qualifications would make a great addition to your team in particular role as a Quality Assurance Inspector responsible for maintaining quality standards at Alsalam , as an Aerospace Quality Assurance Engineer in Shaheen Engineering amp Aircraft Maintenance Services (SEAMS) Pakistan, a subsidiary of Shaheen Air International. I would make a valuable addition to your organization and have the ability to communicate well with The Civil Aviation Directorate, co-workers, and often endeavors to resolve complex technical problems. With more than 5-yearsrsquo Aviation experience, with an in-depth knowledge of Aircraft Manufacturing, Maintenance, and Design. Moreover, while my on-the-job experience has afforded me a well-rounded skill set, include
Perform surveillance audit of Aircraft maintenance checks.
Perform Ramp inspection amp spot check of aircraft.
Inspect assemblies and sub assemblies of Aircraft according to AMM, CMM.
Write non-compliances reports according to /EASA/PCAA.
Measure processes performance according to EASA/PCAA.
Define and lead corrective and preventive actions according to PCAA/EASA standard.
Read plans and validate assemblies
Aircraft Ground support equipment inspection and audit.
Audit team member in Scheduled/ Un Scheduled Audits.
Perform inspections for C of A renewal and maintain a record of the validity of C of A amp C of MR.
Perform preventive amp corrective actions against SAFA inspections raised by regulatory.
Review of Technical log slips for the quality of work, accuracy of rectifications/references.
Perform surveillance audits of support shops to ensure compliance.
Evaluation of Technical Documentation (AD/SB/SL) issued by aircraft manufactures.
Assisted Maintenance Section in Resolution of deferred/repeated technical defects.
Audit team member for approval of the PCAA/EASA-145 organization.
Conducted Incident and/or Accident Investigations.
TNA control and Monitoring for Maintenance personnel.
Correspondence with the regulatory matters concerning Aircraft airworthiness, safety AME licensing.

I am extremely enthusiastic to become a part of the Alsalam Aircraft team and would welcome the opportunity to contribute to your development and optimization goals. Please review my attached resume for additional details regarding my expertise and career achievements. I will follow up to request an appointment to discuss how my experience and background meet your needs.

Thank you for your time and consideration.

Sincerely,
Khair Muhammad
Cell 923310310321

Experience

Quality Assurance Aerospace Engineer (ISO)

Shaheen Engineering And Aircraft Maintenance Services (Shaheen Air International airline )

Aug 2013 - Sep 2018 | Karachi, Pakistan

Details of Experience:
2015 ~Till Date:
ISO Certified Quality Assurance (Aerospace) Professional Engineer in Shaheen Engineering and Aircraft Maintenance Service (SEAMS).subsidary of Shaheen Air International.

JOB DESCRIPTION
 Perform surveillance audit of Aircraft maintenance checks.
 Perform ramp inspection & spot check of aircraft.
 Aircraft ground support equipment inspection and audits.
 Audit team member in scheduled/ unscheduled audits.
 Perform inspections for C of A renewal and maintain a record of the validity of C of A & C of MR.
 Perform preventive & corrective actions against SAFA inspections raised by regulatory.
 Review of technical log slips for the quality of work, an accuracy of rectifications/references.
 Perform surveillance audits of support shops to ensure the compliance.
 Evaluation of technical documentation (AD/SB/SL) issued by aircraft manufactures.
 Assist maintenance section the resolution of deferred/repeated technical defects.
 Audit team member for approval of the PCAA-145 organization.
 Conducted Incident and/or Accident Investigations.
 TNA control and monitoring for maintenance personnel.
 Correspondence with the regulatory matters concerning aircraft airworthiness, safety, AME licensing.

2014~2015:
Professional Technical work with Base Maintenance Team, Worked as Assistant Aircraft Engineer on Aircrafts Airbus A330-200, Airbus A320-200, Airbus A319-100, Boeing B737-300/400/500.

JOB DESCRIPTION
 Removal/Installation/Inspection and functional checks of various aircraft system components.
 Periodic maintenance checks (Check-A, Check-B, and Check-C) as per maintenance schedule.
 Assist AME in troubleshooting of pilot reported defect Arrival/departure of aircraft.
 Servicing of various aircraft systems, refueling and defueling.
 Assist aircraft engineer in trouble shooting, maintenance scheduled/unscheduled Task.
 Performed transit/daily/weekly/check-A and any non-routine task with approved manuals.
 Trouble shooting of aircraft defects before departure in accordance with the aircraft maintenance manual.
 Ensure that the tools & other equipment are in safe condition for use.
 Ensure that any material used during repair & maintenance is duly approved.
 Ensure that quality & safety requirements are properly applied inall activities.
 Ensure that the all work packages are signed by technicians then by an approved person.
 Installing any component physically check and provide a serviceable tag.
 Assist AME for proper documentation required after cannibalization during maintenance
 Supervise the work of technicians following approved procedures.
 Supervise the work of technicians and Monitor the attendance of staff.

2013~2014:
Professional Technical work with Line Maintenance Team, worked as Trainee Aircraft Engineer on Aircrafts Airbus A330-200, Airbus A320-200, Airbus A319-100, Boeing B737-300/400/500.

JOB DESCRIPTION
 Assist the Aircraft Engineer in performing all maintenance tasks.
 Operate the calibrated tools under the supervision of A/E.
 Perform transit/ daily/weekly/Check-A inspection and non-routine task.
 Check the IPC manuals for effectively of parts, issued from the store and made availability.
 Well aware of technical, safety & quality requirements in c/o of any maintenance task.
 Performed the required tasks under Engineer/Crew Chief.
 Improvement in techniques to increase the productivity & efficiency of the work.
 Co-ordinate with other sections if required to carry out the given maintenancetask.
 Report to A/E if any non-conformity and an unsafe condition are observed.

2002~2005:
Practical Work Experience as Cadet Aerospace Engineer, On Job Training (OJT) 3-Year Under the supervision of (Civil Aviation Authority Pakistan).

 Airframe on Job Training (OJT).
 Gas Turbine Engine on Job Training (OJT).
 Aircraft Reciprocating Engine on Job Training (OJT).