-Water Analysis:
• PH of Water
• How to Calibrate the PH device
•TDS of Water(If the TDS is very high, the device isn’t reading for the Sample So directly going to Gravimetric method)
•Electrical Conductivity
• TSS of Water
• total Coliform of bacteria in Water
• Acidity of Water
• Alkalinity of Water
•total Hardness of Water (Ca+Mg)
• total Alkalies( Na+ K) of water
•total Soild of Water
• BOD of Water
•TOC of Water
•COD of Water
•Ammonia of water
•CL ion in water
•SO4 ion in water
•Copper as Cu in water
•Iron as Fe in water
•Manganese as Mn in water
•Zinc as Zn in water
•Residual Chlorine in water
•Nitrate as NO3 in water
•Dissolved Oxygen in Water
•Sulfide
•Phenol for (waste water)
•Turbidity
•Nitrite as NO2
•Cyanide
•Fluoride
•Silica

-Aggregate Analysis:
•Acid Soluble Cl ion in Aggregate BS 812-117
•Acid Soluble So4 ion in Aggregate BS 812-118
• water-Soluble Cl ion in Aggregate BS 1744
• water-Soluble So4 ion in Aggregate BS 1744
• Alkali-Silica Reactivity for Aggregate (ASTM C289)
•CaCO3 for Aggregate


-Soil Analysis:
•water-Soluble Cl ion in Soil (AASHTO method)
•water-Soluble So4 ion in Soil (AASHTO method)
•PH of Soil (AASHTO method)
•water-Soluble Cl ion in Soil (BS 1377)
•water-Soluble SO4 ion in Soil (BS 1377)
•Acid-Soluble Cl ion in Soil (BS 1377)
•Acid-Soluble SO4 ion in Soil (BS 1377)
•Organic of Soil (BS 1377)
•PH of Soil( BS 1377)
•CaCO3 for Soil
•Organic method (ASTM D-2974)for Sand
•Organic impurities (ASTM C40) for Fine Aggregate(Sand)



-Spectrophotometer device(HACH method):
•Organic HACH method
•Sulfide
•Phenol for (waste water)
•Ammonia
•Nitrate NO3 in water
•Turbidity
•Cyanide in Water
•Fluoride in water
•Silica
•TOC of Water
•COD of Water
•SO4 ion in water
•Copper as Cu in water
•Iron as Fe in water
•Manganese as Mn in water
•Zinc as Zn in water
•Residual Chlorine in water
•Nitrate as NO3 in water


-ICP device:
•How to prepare the Sample

-Reagents:
•How to prepare the Reagents Solution

I worked on the Aramco
project, which is a study of
rocks for the well to be drilled
on two device XRD,XRF.

1-Quality control tests for
raw materials. 2-DCS3 device
for TG (glass transition) . 3- Tests for different types of
resins such as gel time and
viscosity. 4-Silica sand is an
example of fiberglass pipe
industry. 5-Moisture content
device in different methods. 6-loss of ignition and analysis
of lamination composition. 7- Physical tests for pipe quality
such as Ultimate tensile
strength, pipe ring stiffness.8
-Daily Reports.

Assisting the doctor for 4
months in the lab in the
manufacture of chemical compounds used as medicines to treat many
diseases, and also help her in
the office in the correction
and monitoring of grades and
the use of Chemdrow
program for the drawing of
chemical compounds and the
use of the program prezi.

Assisting staff in selecting
candidates, ensuring
attendance and departure of
staff.