(Combustion chamber) غرفة احتراق توربينه غازيه

التاريخ : ديسمبر ۲۰۱۷ - فبراير ۲۰۱۸

The combustion chamber was designed in a circular way 40cm high and 40cm width. Three openings were placed from the side to enter the air from the air compressor which works by battery and the second from the top and is closed to an hour to measure the temperature and the third hole is to exit the hot air which in turn moves the fan connected with The turbine, which produces electricity, is equipped with a clock to measure the pressure of air flowing through the tube and also a valve to control the exit of compressed air where the combustion chamber is heated from the bottom by a small gas oven. For example, the gas oven is operated for ten minutes and then we operate the compressor to enter the air. The temperature reaches almost 70 degrees Celsius and the pressure through the pipe is less than 10 bar. At this moment the fan is working. The higher the temperature, the more we will drive the inside of the room. Better in the continued flow of compressed air and the fan continued to work and in turn run the turbine that we will install in the coming stages.